This 8-Foot Ballast Bypass T8 LED Tube (25-Pack) is designed to directly wire into the fixture by “bypassing” the existing ballast. Utilizing the existing fixture wiring, the bypass tubes are single or double-ended allowing for ease of installation. The 8ft LED tubes with single pins are commonly used as T8/T12 retrofit replacements for fluorescent shop light fixtures.
FREE SHIPPING!
Product Description: 8-Foot Ballast Bypass T8 LED Tube
The Viribright 8-Foot Ballast Bypass T8 LED Tube is an ideal choice for installation in retrofit fixtures requiring a tube 96 inches in length. These tubes will commonly be found in workshops, offices, warehouses, grocery stores and similar locations. This tube is to be used without a ballast (direct wire) which reduces overall energy consumption. Making the 8ft T8 tube a perfect replacement for fluorescent tube lights and occasionally strip lights. The total energy consumption of this tube is 40W while producing in excess of 5280 lumens in 4000K, 5000K, and 6000K color temperatures. These tubes are easy to install, but it is recommended to have an experienced electrician handle the bypassing of the ballast and installation. The purchase of an FA8 lamp holder may be required for your installation as this tube is a single pin install.
General Information about T8 LED Tubes
8-Foot T8 tubes are high powered and generally manufactured in three types although the ballast bypass version is the most common type sold in the US. These being the hybrid, the ballast bypass, and the plug-and-play. Unlike the others, the easiest to install is the plug-and-play variant. These can be easily plugged into compatible fixtures. However, it’s best to ensure that the ballast is compatible.
Compatibility details should be found in the Details tab of the products page. Direct wire lamps or the ballast bypass tube requires you to first remove the old ballast. For the most part, this eliminates future ballast maintenance and failure point issues.
However, the fixture may require some rewiring if it is either a double-ended or single-ended operation. Double-ended tubes are known for requiring power on either end while single-ended ones revolve around just one side needing power. When it comes to hybrids, these are simply a unique combination of the other two previously mentioned.
The LED tubes on this one begin as plug-and-play where the ballast eventually becomes unusable. When this occurs, the fixture becomes a bypass lamp. Hence, the ballast is removed and the lamp is rewired to suit the new ballast.
Tips For Choosing the Right Tube
When it comes to choosing the ideal tube, it is recommended that you first check the ratings, color temperature, and certifications associated with the tube. If you didn’t already know, the temperature is measured in Kelvins and is a representation of the light’s color. Those located between the 3000 to the 3500 Kelvin range are ideal for creating warm areas.
In essence, they create the perfect waiting or lobby area. Tubes between 4000 and 5000 Kelvins aid with increasing visibility and significantly reducing eye strain. These are suited for warehouses, classrooms, offices, and hospitals.
The certifications and ratings on these will give a better idea of where and how they can be efficiently and safely used. Those rated as dry location tubes should only be used in an indoor setting and should not be in contact with moisture. However, caution should still be taken for 8-Foot tubes that can be used in the presence of moisture. As such, they should never make contact with liquids.
Learn more about LED Tube Color Temperatures, Sizing and different types of LED Tubes on our T8 Ultimate Guide page.[/vc_column_text][/vc_column][/vc_row]
Ed –
We bought about 4 cases of these for a school retrofit project in the greater El Paso area. Very happy. Worked as expected.
Marcus –
Bought the t8 Lights for a project I was doing. Had to retrofit a store, man these bulbs lit up the place. Owner was happy
alifinternet2001 –
Worked out perfect! They are a little flimsy because of there length. I supported them with a zip tie wrapped around the bulb and fixture In the middle. They are packaged real well. All you have to do is bypass the existing ballast and they are good to go. Retrofitted 8 fixtures in about 4 hours and I am by no means an expert.
Rob Garrett –
I have installed 92 of these in two of my buildings they are the BEST. I haven’t got a new electric bill yet that will be much lower then before I am sure. I think the best part of these lights are 1) The light is amazing 2) getting ride of those hot ballast 3) did I mention the light they give.!
Josephine Tucker –
Worked on my very old light fixtures
Ellen Wood –
every bulb worked out of the box. The light output is far superior than our old florescent bulbs
Colin Krause –
Bulbs work great and are a lot brighter than fluorescent. Metal brackets to stop sag are not needed.
Rebecca Emerson –
“Well package. Super bright. I’m using them for the warehouse and work areas. Too blue for sales floor, need 4000k.
I have installed 40 of them. All are working great!”
Robert Lucero –
Great price fast shipping very bright and good quality. 100% improvement to my shop. Wiring instructions little gauge, but once you figure it out super easy. Been on 24/7 since installed
Ryan Gorham –
This is my third box of replacement LED light bulb. I own a Power Equipment store and have now completed changing all fluorescent light bulbs to LED. They work great and make no humming noise. The light output is better then ever and I am very happy.
Billy Judge –
Got sick of replacing florescent bulbs , having them flicker and carry on when its cool . Rewired all my fixtures and installed these LED tubes , and I am very satisfied with them . I wish I had done it sooner . I still can”t believe how bright they are over the old tubes , but half of them weren”t working anyway . I definitely recommend them .
JOE –
WISH I DONE THIS YEARS AGO. HAVE A AIRPLANE HANGAR 12 FT FLOOR TO FIXTURES IN SIDE 40FT X 70FT WITH 24 / 8FT TUBES 12 FIXTURES. 2 OR 3 FIXTURES A DAY, IN MY SPARE TIME WITH MOVING PLANES AND STUFF AROUND, ON A 10 FT STEP LADDER NO PROBLEM AT 77 YEARS OLD .